Big Dog Motorcycles
Save on Big Dog Motorcycles products at Sturgis City Park. Hurry! Limited time offers. Offers valid only while supplies last.
Big Dog Motorcycles OEM Primary Vent & Seal - 2005-11
This is a new OEM factory primary vent for all 2005-11 Big Dog Motorcycles models. The vent is to protect your starter seal and preventing oil to drain back into the starter. Adding this vent in the back side of the inner primary during 2006 was a ru...
Big Dog Electrical Side Cover Pin Kit - 2005-18
This a set of new Side Cover Push Pins and grommets that were used on later model Big Dogs to replace the old rubber compression nuts & bolts that caused the side cover holes to break. These are the pins that were issued on the factory Service Bullet...
Big Dog Motorcycles Primary Gasket Kit - 2005-11
This primary gasket kit fits all 2005-11 Big Dog Motorcycle models. Includes All O-Rings, Inspection Cover Paper Gasket & Main Seal Ring. This kit will cover every gasket needed to seal the inspection cover to the primary, the outer primary to the in...
BIG DOG THROW OUT BEARING - 2005-11 (UNIVERSAL FITMENT)
Big Dog Motorcycles OEM Throw Out bearing for stock Big Dog Clutch Systems. Includes new C-Clip.. Fits the following models: Bulldog: 2005-11 Chopper: 2005-07 Pitbull: 2005-11 Ridgeback: 2005-11 K-9: 2006-11 Mutt: 2008 Coyote: 2009-11 Mastiff: 2005-1...
Big Dog Motorcycles OEM Primary Drain Plug & Oil Tank - 2005-11
This is a new OEM factory drain plug and oil tank plug. Both primary and oil tanks share the same plug on many years & models. Both fitments are as follows: Primary Drain Plug: ALL Models from 2005-11 Oil Tank: Chopper: 2005-07 K-9: 2006-11 Mastiff: ...
Big Dog Motorcycles Speedometer/Tachometer Carb Harness
This is a new factory Speedometer harness for Big Dog Carbureted Models. It is a universal fitment for all models from 2004-11 with S&S Carburetors. The over all length of this harness is 23" long. If your fitment requires a longer harness, please co...
Big Dog Motorcycles Master Primary Gasket Kit - 1998-2004
This is a new factory replacement primary gasket kit for early Big Dog Motorcycles. This kit will fir the Following years & models: Pitbull: 1998-2004 Ridgeback: 2004 Chopper: 2003-04 Mastiff: 2001-04 Bulldog: 1999-04 Wolf: 2000-02 Husky: 2000-03Genu...
Big Dog Motorcycles Rear Turnsignal Harness
This is a new factory Rear Fender harness for Big Dog models from 2003-11. Includes both signal connectors and contact pins. It is a universal fitment for all models from 2003-11. The over all length of this harness is 35" long. If your fitment requi...
Big Dog Motorcycles Speedometer/Tachometer EFI Harness
This is a new facotry Speedometer harness for Big Dog Fuel Injected Models. It is a universal fitment for all models from 2007-11 with fuel injection. The over all length of this harness is 27" long. If your fitment requires a longer harness, please ...
Big Dog Motorcycles Headlight Harness
This is a new factory Headlight harness for Big Dog models from 2003-11. It is a universal fitment for all models from 2003-11. The over all length of this harness is 25" long. If your fitment requires a longer harness, please contact us for custom m...
Big Dog Motorcycles Voltage Regualtor
This is Big Dog replacement Voltage Regulator for OEM Big Dog Motorcycles from 2003-11. The system will work in conjunction with the factory Stator Rotor and the stock wiring system on the bike. The system is a universal fitment for all Big Dog Motor...
Browse Our Catalog